asbestos removal

Calculate The Cost Of Your Asbestos Removal Needs!

Spread the love

Do you still keep any asbestos product in your house? Are you aware of its presence? Do you know it can cause you harm? Be cautious! You should think about removing it as soon as possible. Now, before deciding to remove it, you have to calculate the removal cost first. Especially, if you lived in the second most expensive place for asbestos services, Perth. However, you don’t need to worry any more. Through a detail estimation, you can manage everything properly.

It will be hard for you to tell the difference between a product which contains asbestos or not. For all we know, it is impossible for you to look at the existence of asbestos within a product using naked eyes. That is why you have to go and check your building thoroughly. Try to have an asbestos testing process which is the only option for you to prove the existence of asbestos in your building legally. Inspecting your house to prove any asbestos presence has to be done by professional assessors. That is what has been said in the applicable regulations made by the government.

How much does it cost for an asbestos service? Well, let’s start with a general sampling procedure in Perth, Adelaide, Brisbane, Melbourne, and Sydney that will cost you about $150 to $500 per sample. Sometimes you need an additional work of an air monitoring which will add more around $600 to $1000. So, the total cost for the asbestos whole inspection usually goes around $750 and $1500. However, you have to keep in mind that each cost of asbestos removal service depends on the state and the city in which your house is located.

Basically, once you have found asbestos in one area, then you will be asked to have a full inspection of your house. Now, a package of full inspection may cost you around $500 and $900. Well, an asbestos testing procedure is important not only to help you ensure your safety. It will also give you a clear status on your property, especially if you are thinking to put it on the market.

Now when the inspection is finished, you can move to the next procedure which is the removal work. The estimation of an asbestos removal service can get a little bit complicated sometimes because, as written above, the rate may vary according to the needed scope of work. In average, hiring a removalist in Western Australia will cost you about $48,5/m2.

Now, check out the lists of the average asbestos removal Perth services costs below:

Vinyl flooring

In Perth, the average cost to remove 30 square metres of vinyl flooring you can get is around $3,000. Just prepare yourself to be charged for at least $8,500 when you remove a vinyl flooring of 100 square metres.


Prepare a budget for around $350 to $500 in minimum when you want to remove eaves with asbestos in your house. On average, the cost to remove 0 to 10 linear metres of eaves is around $50 to $80 per metre. A larger job around 50 lineal metres of eaves may cost you more about $55 to $90 per metre.

Internal cladding

Now a minimum cost for an internal cladding removal you can get in Perth is about $500. Sometime a contractor will ask you about $70 to $100 per square metre to remove up to 20 meter of asbestos internal cladding.


Area Perth
Minimum fee $400-$600
Small jobs (0-50 m2) $80-$110 per m2
Medium jobs (50-100 m2) $60-$100 per m2
Large jobs (more than 100 m2) $45-$80 per m2

External cladding

Area Perth
Small jobs (0-50 m2) $80-$110 per m2
Medium jobs (50-100 m2) $60-90 per m2
Large jobs (more than 100 m2) $60-$80 per m2


Area Perth
Minimum fee $400-$600
10 meter $900-$1600
50 meter $2500-$3500
100 meter $4000-$8000

Post-removal inspection

Complete the whole project with a post-removal inspection of air monitoring. This is important to make sure the safety as well as the completion of the entire removal procedures. The post-removal inspection services may charge you around $1000 to $2000.

You don’t need to be panic when you face an asbestos in your house. Just call the expert! If you don’t know the difference between linear metres and square metres, here’s how you do it right!

The square metres

  • Measure the width and the length of the targeted asbestos product in metres.
  • Multiply the width by the length.

The linear metres

  • Measure only the length of the targeted asbestos product in metres – forget about any other dimensions.
  • Done!

If you are looking for a suitable removalist to handle the job, it will be easier for you to search for it via online. Nowadays, there are many asbestos contractors. One of the best I recommend is Asbestos Watch Perth Safe your family and free yourself from asbestos!

Leave a Reply

Your email address will not be published. Required fields are marked *